Pump Ops Chap. 13

______ pumper(also called the ______ pumper) is that pumper connected to the water supply at the beginning of the relay operation

Source pumper should be the engine with the ____________________

Water supply may be a ________ or a _______ water supply source

_____ pumper, sometimes referred to as the ________ pumper; receives water from the source pumper or another relay pumper, boost the pressure, and supplies the next pumper in the relay

Hose tenders usually carry a _____or more of LDH (___" or greater)

Smaller sizes of hose used for relay pumping include ___ to ___-inch hoselines. Generally ___ or _____ of these hoselines are laid

LDH ranges in size from ___ to ___inches, with ___ and ___inch being the most common sizes

Intake pressure relief valves, also called ______________

Two basic kinds of intake pressure relief valves: One is a integral part of the pump ___________. Second is screwed onto the _______________

Intake pressure relief valves that are adjustable should be set within ___psi above the discharge pressure of the _________ pumper in the relay

Relay pumping is based on two things:

If desirable to increase the amount of flow through a relay, one of three things will be necessary

Relay: pumpers increase their pump pressure, this does not necessarily mean that the _______ of water through the relay will be increased

Pumpers are rated to pump their max volume capacity at a net pump pressure of ____psi at _____.

Max rated capacity from a static water source, if the pump operates at a pressure higher than ___ psi, volume capability of the pumper is ________