Answer These EIGRP Configurations Flashcards

1. Shows the working interfaces that eigrp is enabled
2. Does not show passive interfaces

1. Show what networks the router will route for.
2. Shows the source of the routing information
3. Shows the interfaces that eigrp is enabled on.
4. Explicitly list the passive interfaces.
5. Shows the k-values.
6. Shows the variance multiplier.
7. Shows the maximum number of paths.

1. List known eigrp neighbors and what interface they are off of.
2. Can show the hold timer by running the command a few consecutive times.

1. Shows all successor and feasible successor routes.
2. Show total delay and bandwidth of a route.
3. Shows the FD and RD metric for each route.
4. Shows if EIGRP is in the passive or active state.

1. List the contents of the IP routing table
2. eigrp routes are listed with a code of D

1. Shows the hello timer
2.

1. Shows the hold timer.

1. Lists the key chain configuration.
2. Lists all current valid keys.

1. List a message why neighboring routers failed authentication.

1. Shows if a neighbor is a static neighbor.
2. Shows if a neighbor is a stub.

1. Displays messages when a prefix is not advertised out an interface due to split horizon.

1. Shows the FD.
2. Shows the eigrp metric values.

1. Shows the different routes.
2. Shows its next hop.
3. Show its FD.

1. Lists all possible routes.