+
Cards In This Set
| Front | Back |
|
You want the text "Unauthorized access prohibited!" to be displayed before the
login prompt every time someone tries to initiate a Telnet session to a Certkiller
router, as shown in the example below:
Router#telnet 192.168.15.1
Trying 192.168.15.1 ... Open
Unauthorized access prohibited!
User Access Verification
Password:
Which command can be used to configure this message?
|
C. banner motd x Unauthorized access prohibited! X
|
|
A Certkiller router was configured as shown below:
A Certkiller .com technician is connected to the router console port. After
configuring the commands displayed in the exhibit, the technician log out and then
logs back in at the console. Which password does the technician need to enter at the
router prompt get back into the privileged EXEC mode?
|
B. Certkiller 2
|
|
Refer to the graphic. Although the console password was set to " Certkiller ", it
displays in the router configuration as shown. What command caused the password
to be stored like this?
|
D. Certkiller 1(config)# service password-encryption
|
|
The Certkiller 1 and Certkiller 2 routers are connected together as shown below:
Users on the Certkiller 1 LAN are able to successfully access the resources on the
Certkiller 2 network. However, users on Certkiller 1 are unable to telnet to the
Certkiller 2 router. What do you suspect are the likely causes of this problem? (Select
two answer choices)
|
C. An access control list
F. A missing vty password.
|
|
A new Certkiller is using an IEEE 802.11b a wireless LAN. What is the maximum
data rate specified for this WLAN?
|
A. 11 mbps
|
