Ccna 640-802 Vlans-vtp

My ccna  

17 cards   |   Total Attempts: 188
  

Related Topics

Cards In This Set

Front Back
What are three benefits of implementing vlans?
A higher level of network security can be reached by separating sensitive data traffic from other network traffic. A more efficient use of bandwidth can be achieved allowing many logical networks to use the same network infrastructure. Broadcast storms can be mitigated by increasing the number of broadcast domains,thus reducing their size.
What is a valid reason for a switch to deny port access to new devices when port security is enabled?
The denied MAC addresses are statically configured on the port.
Which three statements accurately describe Layer 2 Ethernet switches?
Microsegmentation decreases the number of collisions on the network In a properly functioning network with redundant switched paths, each switched segment will contain one root bridge with all its ports in the forwarding state. All other switches in that broadcast domain will have only one root port. Switches that are configured with vlans make forwarding decisions based on both layer 2 and layer 3 address information.
A network administrator needs to configure port security on a switch. Which two statements are true?
When dynamic mac address learning is enabled on an interface, the switch can learn new addresses up to the maximum defined. The sticky learning feature allows the addition of dynamically learned addresses to the running configuration.
Which two features did WPAv1 add to address the inherent weaknesses found in WEP?
Key mixing using temporal keys Per frame sequence counters
To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?
The VTP management domain name of both switches must be set the same One of the two switches must be configured as a VTP server
What is the purpose of the Cisco VLAN Trunking Protocol
To allow for managing the additions, deletions, and changes of VLANs between switches
Which three statements accurately describe Layer 2 Ethernet switches?
Microsegmentation decreases the number of collisions on the network In a properly functioning network with redundant switched paths, each switched segment will contain one root bridge with all its ports in the forwarding state. All other switches in that broadcast domain will have only one root port Switches that are configured with vlans make forwarding decisions based on both layer 2 and layer 3 address information
Which two Cisco IOS commands, used in troubleshooting, can enable debug output to a remote location?
Logging host ip-address Terminal monitor
Which three are characteristics of an IPv6 anycast address?
Delivery of packets to the group interface that is closest to the sending The same address for multiple devices in the group One-to-nearest communication model
Which PPP subprotocol negotiates authentication options?
LCP
Which command allows you to verify the encapsulation type (CISCO or IETF) for a frame Relay link?
Show frame-relay lmi
What is one benefit of PVST+?
PVST+allowthe root switch location to be optimized pervlan
Which three statements about VTP features are true?
When properly configured, VTP minimizes VLAN misconfiguration and configuration Client, server, and transparent are valid VTP modes. VTP pruning is used to increase available bandwidth in trunks links
Which Cisco IOS diagnostics command can disrupt the operation of a router under high load conditions?
Show processes cpu