+
Cards In This Set
| Front | Back |
|
Which of the following commands will display the name of the IOS image file being
used in a Certkiller router?
|
B. Router# show version
E. Router# show flash
|
|
After making changes to the router, you issue the "copy running-config
startup-config" command to save changes. After reloading the router, the router
comes up in setup mode. You again make changes, save them, and reboot. Again, the
router comes up in setup mode.
What is the most likely cause of this?
|
C. The configuration register setting is incorrect.
|
|
You need to upgrade the IOS of an existing router on your network. The new IOS
image is located on a TFTP server that you have set up within the network. What
command should you issue in order to download the new IOS version?
|
A. Router# copy tftp flash
|
|
Study the exhibit below:
The Certkiller systems administrator in Lisbon has configured a new router to
connect with his company's head office in Gibraltar. He attempted to create and
save an image file of the new router on the TFTP server in Gibraltar but failed.
Based on the information given by above exhibit, what is the underlying problem?
|
B. There is an incorrect subnet mask of the TFTP server.
|
|
Study the exhibit below:
You just connected your computer directly to the E0 port of a router and you're
running a console session. Which of the following steps below are required to
successfully implement the "copy flash tftp" command and upload the flash image
onto the TFTP server? (Select three answer choices)
|
B. TFTP server software must be running on the administrator's workstation.
D. The copy flash tftp command must provide the IP address of the administrator's
workstation.
E. The administrator's workstation must be on the same subnet as the router E0 interface.
|
