+
Related Flashcards
Related Topics
Cards In This Set
| Front | Back |
|
What is the density limits of radiograph for a weld as compared to the IQI?
|
-15% to 30% (ASME SEC V PAR T-282.2(a))
|
|
What is the minimum remaining life required in order to perform an onstream in lieu of an internal inspection ?
|
10 yrs. (API 510 PAR 6.5.2.1(b)(2))
|
|
What is the maximum interval for a relief valve in clean,non-fouling, non-corrosive service?
|
10 yrs. (API 510 PAR 6.6.2.2(b))
|
|
What is the maximum interval between reassessments of an RBI ?
|
10 yrs. (API 510 PAR 5.2.4)
|
|
What is the maximum interval for an internal inspection ?
|
Lesser of 10 yr. or 1/2 remaining life. (API 510 PAR 6.5.1.1)
|
|
What is the maximum interval for a relief valve in fouling or corrosive service ?
|
5 yrs. (API 510 PAR 6.6.2.2.(b))
|
|
What is the maximum interval for an external inspection ?
|
Lesser of 5 yrs. or internal interval. (API 510 PAR 6.4.1.)
|
|
What is the maximum interval for calibrating a electromagnetic yoke ?
|
Annual (ASME SEV V Article 7 - T-762)
|
|
What is the length of time that causes a welder certification to expire if the process is not used ?
|
6 months (ASME SEC IX - QW-322.1(a))
|
|
What is the maximum interval for calibrating a densitometer ?
|
Daily (ASME SEC V Article 7 - T-762)
|
|
What is the minimum time to wait for checking for delayed cracking after welding stainless steel cladding ?
|
24 hours (API 510 8.1.5.4.4)
|
|
What is the maximum interval for checking the light intensity of a black light ?
|
Prior to use (AMSE SEC V Article 6 - T-676.4(e) & Article 7T-777.3(f))
|
|
What is the time range for interpreting a liquid penetrant examination after application of the developer ?
|
10 minutes to 60 minutes ASME SEC V Article 6 - T-676.1
|
|
What is the minimum time an examiner should be in a darkened area prior to using a black light to perform a MT or PT examination?
|
5 minutes ASME SEC V Article 6 - T676.4(b)
|
|
What is the minimum allowed wall thickness at a pit ?
|
1/2 required thickness API 510 PAR. 7.4.3(a)
|
