3DX5X Volume 1 Section 1

Volume 1 Section 1

29 cards   |   Total Attempts: 188
  

Cards In This Set

Front Back
What do AFOSH standards and publications provide?
They provide us guidance for fundamental occupational environments and work areas/shops.
Page 1-10
What must you do if you believe a potential safety hazard may exist in your work area?
Immediately secure the area and contact your supervisor, unit safety representative, or ground safety office.
Page 1-10
How does the AF obtain the AFOSH goal of minimizing icidences of chemically induced occupational illnesses and injuries in the work areas/shops?
By establishing guidance for training employees on the health and physical hazards associated with proper preventive measures.
Page 1-10
What is ionizing radiation (radioactivity)?
Electromagnetic radiation whose waves contain energy sufficient to overcome the binding energy of electrons in atoms or molecules.
Page 1-11
With whom would you coordinate the disposal of hazardous waste material?
With the host installation environmental management such as the base bioenvironmental engineering.
Page 1-12
Who normally conducts first-aid and CPR training for unit instructors?
The installation medical facility.
Page 1-12
Define operational risk management.
Decision-making process to systematically evaluate possible courses of action, identify risks and benefits, and determine the best course of action for any given situation.
Page 1-14
Name the four principles that govern all actions associated with the ORM.
Accept no unnecessary risk; Make risk decisions at the appropriate level; Accept risks when benefits outweigh the costs; Integrate ORM into operations and planning at all levels
Page 1-14
Which document would you reference to learn about the ORM program?
AFI 90-901
Page 1-15
What hazards do noise areas with above 85 decibels create?
Hazardous noise areas could restrict verbal communication and extensive exposure at levels at or above 85 dB can cause hearing loss.
Page 1-16
What should you consider when cleaning raised computer room floors?
Do not use flammable liquids or abrasive scrubbing powders. Use adequate ventilation if using toxic cleaning agents.
Page 1-18
Where should emergency control switches be installed in data processing rooms; what should they disconnect?
They are best located at designated exit doors. They disconnect the ventilation system and selective power to all electrical equipment excluding lighting.
Page 1-18
How are electrostatic charges generated?
Whenever there is motion between various types of material (friction)
Page 1-19
When handling computer memory chips, what can you do to reduce electrostatic hazards?
You should use a groundind strap
State the three classes of ESD.
Class 1: 0-999V
Class 2: 1000-3999V
Class 3: 4000-14999V
Page 1-21